No products in the cart.
No products in the cart.
2011-2016 Ford Super Duty OEM & Aftermarket Parts
Looking for parts for your 2011, 2012, 2013, 2014, 2015, or 2016 Ford Super Duty? Texas Truck Parts stocks factory OEM take-off parts pulled from used 2011-2016 F-250, F-350, and F-450 Super Duty trucks — typically low-mileage pickups — plus a wide range of aftermarket replacement parts from leading manufacturers. We carry parts that fit every trim level — XL, XLT, Lariat, King Ranch, Platinum, and Limited — all the way through the lineup. Higher trims may have additional camera and sensor cutouts on certain panels, and we’ll confirm those details with you by phone before shipping. Parts on this page are specific to the 2011-2016 body generation and do not cross-fit with later Super Duty trucks. Whether you need a factory bumper after a fender-bender, a replacement tailgate, OEM tail lights, or a complete truck bed after collision damage, we have it for the current-gen Ford Super Duty at well-below-dealer pricing. Free shipping to the lower 48 states from our Sugar Land, TX warehouse.
Shop 2011-2016 Ford Super Duty Parts by Category
Front Bumpers (OEM)
Factory front bumpers in original paint colors. F-250/F-350 and F-450/F-550 use different bumpers — call to confirm fitment.
Shop Front Bumpers →Front Replacement Bumpers
Heavy-duty aftermarket front bumpers from Tough Country, Ranch Hand, Fab Fours, Rough Country, One Source and more.
Shop Front Replacement →Rear Bumpers (OEM)
Factory rear bumpers — painted, chromed, and step-assist style. Fits F-250, F-350, F-450 cross-compatibly.
Shop Rear Bumpers →Rear Replacement Bumpers
Aftermarket rear bumpers with hitch receivers, sensor cutouts, and grip steps. Fits F-250 through F-550.
Shop Rear Replacement →Tail Lights
OEM tail lights for 2011-2016 Super Duty — available in LED w/ BLISS, Halogen w/ BLISS, and standard Halogen. Driver-side, passenger-side, or matched pairs.
Shop Tail Lights →Tailgates
Factory tailgates including regular, with-step, and Platinum / King Ranch / Limited trim versions.
Shop Tailgates →Truck Beds
Complete SRW (Single Rear Wheel) and DRW (Dual Rear Wheel) factory beds in 6.5 ft and 8 ft lengths.
Shop Truck Beds →Fitment Compatibility — 2011-2016 Ford Super Duty
All parts on this page are sourced specifically for the 2011-2016 Ford Super Duty body generation. Hover any column to see which part types fit that sub-model.
| Part Type | F-250 | F-350 | F-450 | F-550 |
|---|---|---|---|---|
| Tailgates (OEM) | ✓ | ✓ | ✓ | — |
| Tail Lights (OEM) | ✓ | ✓ | ✓ | — |
| Truck Beds (OEM) | ✓ | ✓ | ✓ | — |
| Rear Bumpers (OEM) | ✓ | ✓ | ✓ | — |
| Front Bumpers (OEM) | F-250/F-350 specific | F-250/F-350 specific | F-450/F-550 specific | F-450/F-550 specific |
| Front Replacement Bumpers | F-250/F-350 fitment* | F-250/F-350 fitment* | F-450/F-550 wider | F-450/F-550 wider |
| Rear Replacement Bumpers | ✓ | ✓ | ✓ | ✓ |
*Important note on front bumpers: The F-450/F-550 trucks are wider than the F-250/F-350. While aftermarket front replacement bumpers will physically mount on any F-250 through F-550, manufacturers often make F-450/F-550-specific versions that better match the wider front-end geometry. If you're ordering a front replacement bumper, call us at 832-706-8091 or email info@texastruckparts.shop with your trim and we'll confirm the right fit before you buy.
Why OEM Take-Off Parts?
OEM take-off parts are authentic Ford factory parts pulled from used trucks — not aftermarket copies. Because they come off low-mileage pickups, they cost a fraction of what Ford dealers charge for the same brand-new replacement. Take-offs are ideal for:
- Collision repair — match your truck’s original factory finish exactly
- Trim upgrades — install a Platinum or King Ranch tailgate on an XLT
- Replacing damaged panels — rust, dents, scratches
- Resale prep — restore your truck to factory-fresh before selling
For situations where take-off inventory isn’t in stock for your specific configuration, we also carry aftermarket replacement parts from the most-trusted brands in the industry — built tougher than factory for off-road and heavy-duty use.
Why Texas Truck Parts & Accessories
- Sugar Land, TX warehouse — serving Houston and shipping nationwide
- Free shipping to the lower 48 states — LTL freight for bumpers, hotshot trailer delivery for truck beds
- Financing available through Acima, Progressive, and SNAP — from approximately $55/month
- Local pickup welcome at our Sugar Land warehouse
- Fitment help by phone or email — call 832-706-8091 or email info@texastruckparts.shop with your VIN and we’ll confirm compatibility before you order
Looking for Other Ford Super Duty Years?
We also stock parts for earlier Ford Super Duty generations. Parts on this page (2011-2016) are specific to the current body and do not cross-fit to earlier generations:
- 2020-2022 Ford Super Duty Parts →
- 2017-2019 Ford Super Duty Parts → (many aftermarket bumpers and tailgates cross-fit with 2020-2022)
- 2011-2016 Ford Super Duty Parts →
Frequently Asked Questions
What is the difference between OEM take-off parts and aftermarket parts?
OEM (Original Equipment Manufacturer) take-off parts are authentic Ford factory parts pulled from used 2011-2016 Super Duty trucks. Aftermarket parts are made by third-party manufacturers like Tough Country, Ranch Hand, Fab Fours, Rough Country, and One Source — often built tougher than factory for off-road and heavy-duty use. Both work great.
Will a 2011 F-250 part fit a 2016 F-350?
In most cases yes — the 2011-2016 Ford Super Duty shares the same body generation. Tailgates, tail lights, truck beds, and rear bumpers cross-fit across F-250, F-350, and F-450. Front bumpers are the exception: F-250/F-350 use different front bumpers than F-450/F-550 due to wider front-end geometry. Check our fitment table above.
What tail light options are available for 2011-2016 Super Duty?
Note: The 2011-2016 Super Duty pre-dates Ford BLISS (Blind Spot Information System), so tail lights for this generation are standard Halogen only. We carry factory Halogen tail lights pulled from used trucks, sold individually or in matched pairs.
Do you ship truck beds nationwide?
Yes. We ship complete truck beds via hotshot trailer to both residential and commercial addresses in the lower 48 states. Delivery is scheduled in advance — typically 3-7 business days depending on your location. Free shipping is included on most bed orders.
How can I confirm a part fits my exact truck before ordering?
Call or text us at 832-706-8091 or email info@texastruckparts.shop or email info@texastruckparts.shop with your VIN and trim level (XL, XLT, Lariat, King Ranch, Platinum, or Limited). We will cross-reference your truck against our inventory and confirm fitment — including sensor cutouts, camera holes, and parking-assist holes — before you place the order.
What financing and payment options do you accept?
We accept all major credit cards plus financing through Acima, Progressive Leasing, and SNAP Finance. Approvals are typically fast and start around $55/month. Local pickup also available at our Sugar Land, TX warehouse.
Need help finding the right part for your 2011-2016 Ford Super Duty?
Call 832-706-8091 or email info@texastruckparts.shop with your VIN, message us via the contact page, or browse the full inventory by category above.
